Your website browser is no longer supported.

PHENOLIC WHEELS

  • Wheels are molded of heavy macerated or chopped canvas, impregnated with phenolic resin and accurately formed in close fitting molds under high pressure and temperature.
  • Load Capacity:Up to 2,500 lbs.
  • Floor Protective:Non-marking.
  • Lubrication:All wheels with 1-5/8" and 2-3/16" hub length are nominally lubricated through hollow axle. These wheels can be fitted with zerk fittings where specified. The following wheels must be lubricated through hollow axle or be supplied with prelubricated sealed bearings.
  • Seals:All wheels that have 1-3/16" bore and either a 1-5/8" or 2-3/16" hub length equipped with 3/4" straight roller bearing have as a standard feature nylon seal retaining/thrust washers which add 3/16" to hub length and are supplied with 1/2" I.D. hardened spanner bushing.
  • Usable Temperature:Continuous operating temperatures from -65° F to +250° F and intermittent duty to 300° F. See special purpose. Textile wheels for temperatures exceeding these limits.
  • Excellent load carrying characteristics.
  • Most sizes of straight roller or tapered roller bearings can be furnished with seals. Material can be machined to custom configurations for your special application.
  • Highly Shock Resistant.

PHENOLIC / HIGH TEMP TEXITE WHEELS

  • High Temperature Phenolic Wheels (TR) use the same resin as the standard Texite Wheel, but the filler material is substituted with a material that will take higher heat before breaking down.
  • Capacity:Up to 2,500 lbs.
  • Temperature Range:Continuous + 475°F. Intermittent to + 525°F.
  • Wheels Are Available With:Stainless Steel Spanner Bushings, Stainless Steel Roller Bearings, Electroless Nickel Plated Roller Bearings.
  • Applications:Include baking ovens, curing ovens and autoclaves.

HIGH-TEMP PHENOLIC WHEELS

  • Phenolic resin mixed with macerated canvas made for high temperature applications best suited for dry heat (powder coating, bakeries, etc).
  • Capacity:Up to 2,600 lbs.
  • Durometer:95 Shore D +/-5.
  • Temperature Range:-40°F to +475°F. continuous, 550°F intermittent.
  • Exceptional resistance to oil, grease, and most acids, chemicals and cleaning solutions.
  • Hard tread rolls exceptionally easy; not recommended for rough surfaces.